RECENT PROJECTS ACROSS AUSTRALIA
GOYDER SOUTH WINDFARM
This project is located near the towns of Burra and Robertstown in South Australia’s Mid North region, approximately 2 hours drive from Adelaide.
The Zone consists of 2 separate projects: Goyder North (North of Burra), and Goyder South (South of Burra).
3D Site Worx helped the principal contractor achieve its goal in delivering the Phase 5 section of the project with our quality plant and staff.
The whole project was governed by a 3D SiteWorx base network which was able to deliver RTK signal to all contractors on this project.
HAWKSDALE TRANSMISSION LINE
The Hawkesdale Wind Farm site is located in South-Western Victoria near the township of Hawkesdale,
30km north-west of Warrnambool, and 175km west of Geelong, within the Moyne Shire Local Government Area.
The windfarm comprises 23 turbines with a total output of approximately 97MW. It will connect to the grid via a 132kV overhead transmission circuit to the existing 500kV Tarrone Terminal Station.
3D SiteWorx was tasked with Commissiong the RTK base network for this project and supplied a vehicle mounted RTK Rover solution with avoidance zones outlined for cultural heritage & natural veg protection.
MAJORS ROAD BRIDGE UPGRADE
Majors Road is an important arterial road, providing a key connection between Lonsdale Road and Main South Road.
Majors Road currently carries approximately 13,200 vehicles per day. The Southern Expressway carries approximately 74,000 vehicles per day between Darlington and the Reynella interchange.
3D SiteWorx implemented Quality wet hire machinery and staff on this project to help the principal contractor (Delta Group) achieve its goals in a timely fashion.
Remote data upload and control was used on this project to make sub contractors data requirements and the amount of data revisions on this project super easy for all.
PAREP ENERGY PARK
The Port Augusta Renewable Energy Park (PAREP) is a combined wind and solar photovoltaic (PV) hybrid project.
It is one of the southern hemisphere's largest hybrid renewable energy power stations, It comprises 50 wind turbines and 250,000 solar modules together with associated infrastructure and has a total installed capacity of almost 320 megawatts (MW) of renewable energy.
A 275kV substation and export cable connects the project into the South Australian transmission network.
Our 3D SiteWorx team supplied our very first wet hire grader on a long term contract for this project, whilst also supplying the engineer team with adequate RTK Rover units for the life of the project.
This was our first renewable energy project for 3D SiteWorx and it was completed very professionally and evidently lead into more concurrent jobs later in our career.
Our Brands
